Show cdp neighbors
From Joe
That's raelly shrewd! Good to see the logic set out so well.
Contents |
[edit] Mód
- Switch
- Switch#
[edit] Szintaxis
Show Cdp Neighbors
Show Cdp Neighbors detail
[edit] Szintaxis leírása
detail részletes információ megjelenítése
[edit] Parancs leírása
CDP protokoll alapján felderített szomszédok adatainak megjelenítése
[edit] Példa
1. példa:
c_2940#show cdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone
Device ID Local Intrfce Holdtme Capability Platform Port ID
C_2940_Switch Gig 0/1 129 S I WS-C2940-8Gig 0/1
2. példa: Részletes CDP infó megjelenítése.
c_2940#show cdp neighbors detail Device ID: C_2940_Switch Entry address(es): IP address: 172.11.25.130 Platform: cisco WS-C2940-8TT-S, Capabilities: Switch IGMP Interface: gigabitethernet 0/1, Port ID (outgoing port): gigabitethernet 0/1 Holdtime : 131 sec Version : Cisco Internetwork Operating System Software IOS (tm) C2940 Software (C2940-I6K2L2Q4-M), Version 12.1(22)EA2, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2004 by cisco Systems, Inc. Compiled Mon 08-Nov-04 00:57 by antonino advertisement version: 2 Protocol Hello: OUI=0x00000C, Protocol ID=0x0112; payload len=27, value=00000000FFFFFFFF010221FF00000000000000127F95EC80FF0000 VTP Management Domain: 'domain_neve' Native VLAN: 1 Duplex: full Management address(es): IP address: 172.11.25.130
3. Példa: HP procurve switch felderítése:
c_2940#show cdp neighbors detail Device ID: hp2525(000f20-a66a00) Entry address(es): IP address: 172.11.210.104 Platform: HP 2524, Capabilities: Switch Interface: FastEthernet0/20, Port ID (outgoing port): 1 Holdtime : 154 sec Version : Revision F.05.17 /sw/code/build/info(s02) advertisement version: 1 Management address(es):
This piece was cgeont, well-written, and pithy.
I found just what I was needed, and it was enteartinnig!
