JMRI Preferences setup

From Jmri

Revision as of 22:02, 21 February 2006 (edit) Admin (Talk | contribs) m ← Previous diff		Current revision as of 15:05, 21 November 2007 (edit) (undo) 63.147.134.5 (Talk)
(9 intermediate revisions not shown)
Line 1:		Line 1:
-	In general, if things are working as expected, you shouldn't need to change any of the settings herein. However, if this is not the case, please read on....	+	drontrdronac
		+	After you have installed the ''JMRI'' programs it will be necessary to set the preferences in order to run the programs.
-	After you have started any of the JMRI programs you can access this page via the usual 'file -> preferences' or similar choice - Something similar to this window should open:	+	First -- you must determine which connection you are making to the program -- this will be determined by the COM Port which is being used by your interface.
		+
		+	Second - click on [[Edit]] then [[Preferences]]    to open the Preference selection window.
		+
		+	The '''Layout connection''' box should show 'none' to indicate that you have not yet selected the interface device which you are using to connect ''JMRI'' to your Command Station/layout.
		+
		+	Click on the arrow on the right side of this box and use the drop down items to select your interface device.
		+
		+	The '''serial port''' box should show 'none'.  This indicates that you have not yet selected the com port by which your interface device is connected to the computer.
		+
		+	Click on the arrow on the right side of this box and select the appropriate com port.
		+
		+	The '''Baud Rate''' section should not normally be changed.
		+
		+	The '''Command Station type''' sction should be chnaged to reflect which Command Station you are using.
		+
		+	The '''GUI Style''' section determines how the program will look on your commputer screen.  This can be set as you choose.
		+
		+	The '''Programmer defaults: Format''' selection must also be completed depending on the interface you are using.  For most users 'Comprehensive' should be selected.
		+
		+
		+
		+	When you are finished click on [[Save]].
		+
		+	At this time you should [[Quit]] and then Restart the program.
		+
		+	When the program restarts you should see the opening screen which will now indicate how you are connected to your layout.
		+
		+	[[Image:jmri startup.gif]]
		+
		+	Select [[Edit]] then  [[Preferences]] to ensure that the selections you made are correct.
		+
		+	A screen similar to this should appear:
	[[Image:prefs.gif]]		[[Image:prefs.gif]]
-	Clicking on the 'layout connection' box will open a list of ways that the program supports connecting to your layout. Hopefully you can find the relevant option in this list - Select it and '''save'''.	+	If things are correct close this window and try to use the program to perform a task.
		+	ie.  program a Decoder, create a Panel, ....
-	Hopefully the remaining options can be figured out from a combination of your user manuals and common sense! [No offense, but if you don't know what command staton you're using we probably can't help :-) ]
-	Once these are set appropriately, you should be able to get to the 'start screen' shown in the [[DecoderPro]] page without either option being 'greyed out'	+	[[Category:Instruction manuals]]

---

Current revision as of 15:05, 21 November 2007

drontrdronac After you have installed the JMRI programs it will be necessary to set the preferences in order to run the programs.

First -- you must determine which connection you are making to the program -- this will be determined by the COM Port which is being used by your interface.

Second - click on Edit then Preferences to open the Preference selection window.

The Layout connection box should show 'none' to indicate that you have not yet selected the interface device which you are using to connect JMRI to your Command Station/layout.

Click on the arrow on the right side of this box and use the drop down items to select your interface device.

The serial port box should show 'none'. This indicates that you have not yet selected the com port by which your interface device is connected to the computer.

Click on the arrow on the right side of this box and select the appropriate com port.

The Baud Rate section should not normally be changed.

The Command Station type sction should be chnaged to reflect which Command Station you are using.

The GUI Style section determines how the program will look on your commputer screen. This can be set as you choose.

The Programmer defaults: Format selection must also be completed depending on the interface you are using. For most users 'Comprehensive' should be selected.

When you are finished click on Save.

At this time you should Quit and then Restart the program.

When the program restarts you should see the opening screen which will now indicate how you are connected to your layout.

File:Jmri startup.gif

Select Edit then Preferences to ensure that the selections you made are correct.

A screen similar to this should appear:

If things are correct close this window and try to use the program to perform a task. ie. program a Decoder, create a Panel, ....