Index.php

From Wikimochis

Hearing products which easily fit into the head.

You must vigilantly wipe down with a dry cloth or tissue when removing your hearing aid before you go to bed. Some time should be also spent by you examining the area of the hearing aid that fits to the ear canal because it is probable that a of ear wax might have happened. If here is the case then you must eliminate the wax. When you ordered the hearing aids you should receive a cleaning tool which may be used to achieve this which typically takes the shape of a pick or a brush or a toothbrush could be also used by you.

Hearing aids which fir behind the ear.

Much like the above mentioned, the procedure is comparable. Nevertheless, the main big difference being that the ear mold which fits to the ear which is normally made from Lucite or silicon which is non-electrical and therefore can be cleaned in mild soapy water. Before washing it is vital that you ensure the earpiece is disconnected from the behind the ear section to ensure the part of the hearing aid doesn't get wet. Dry the head piece properly before using and also make certain that the tube is clear of water. Take note that the tube may need certainly to be replaced following a time frame usually 3 to a few months as the mobility may be lost.

Things to not do

1. Clean the hearing aid with solvents or alcohol as this can cause the materials where the aid is built to break up. You can purchase special washing fluids built to clean hearing aids.

2. Dont allow the part of the hearing aid get wet. Prevent wearing the aid when bathing of bathing.

3. Try not to drop the hearing aid, particularly on a hard floor as this might cause the hearing aid to break.