Index.php

From Thikipedia

You've had a fire. The fire department has come, put the fire out and all you see is one big mess. Upon closer investigation concerns come.

I. What technique do we use to eliminate the soot and charcoal to evaluate the harm?

- Higher pressure water blasting leaves behind water in electrical elements, equipment and insulation, if not appropriately removed will cause undesirable corrosion and rot, increasing cleanup, harm and long term upkeep charges.

- Soda blasting leaves water and soda behind, which calls for added cleanup, escalating cleanup, harm and long phrase maintenance expenses.

- Sand blasting leaves abrasive blast media behind, which if not cleaned up effectively continues to trigger harm in electrical elements, gears and bearings. It continues to fall from horizontal surfaces, cracks and beams years right after the job is carried out, growing cleanup, damage and extended term

upkeep costs.

- Dry ice blasting is the ultimate surface cleaning procedure, it leaves no secondary waste stream behind. The only cleanup following the dry ice blasting job is done is the removal of the debris caused by the fire.

II. How do we remove the soot, charcoal and smoke film from masonry and steel surfaces?

- Again this is an superb application for dry ice blasting. Watch the movie clips on our net website to see how dry ice blasting cleans soot, smoke and charcoal from different sorts of surfaces.

III. Will we be in a position to remove that awful smoke smell?

- The getting rid of of the smell is accomplished by removing the smell source and/or sealing the smell supply to encapsulate it. Dry ice blasting removes the soot, charcoal and smoke film, which is the smell supply, from accessible areas.

- For the duration of a fire air currents carry smoke and soot into cracks, openings and locations not in close proximity to the fire itself, extra cleaning and/or sealing of these places and inaccessible regions might be necessary.

IV. Can we achieve our cleanup without adding hazards to our environment?

- Dry ice blasting is risk-free and environmentally friendly. Dry ice is pure CO2 in its solid state, it is in its gaseous state in the air around us. When we inhale our bodies use the oxygen and we exhale CO2. Green plants take CO2 from the air and give off oxygen.

- Dry ice blasting is non-toxic, non-conductive and there is no employee exposure to hazardous cleaning chemical substances or options. Dry ice blasting meets the guidelines of the USDA, EPA, and the FDA. You have had a fire. The fire division has come, place the fire out and all you see is one huge mess. Upon closer investigation questions come.

I. What approach do we use to remove the soot and charcoal to evaluate the damage?

- High pressure water blasting leaves behind water in electrical components, gear and insulation, if not effectively removed will cause undesirable corrosion and rot, escalating cleanup, damage and extended phrase maintenance costs.

- Soda blasting leaves water and soda behind, which needs additional cleanup, growing cleanup, harm and long term upkeep expenses.

- Sand blasting leaves abrasive blast media behind, which if not cleaned up properly continues to trigger harm in electrical elements, gears and bearings. It continues to fall from horizontal surfaces, cracks and beams years following the job is carried out, rising cleanup, harm and extended term

maintenance expenses.

- Dry ice blasting is the ultimate surface cleaning process, it leaves no secondary waste stream behind. The only cleanup immediately after the dry ice blasting job is accomplished is the removal of the debris brought on by the fire.

II. How do we take away the soot, charcoal and smoke film from masonry and steel surfaces?

- Once more this is an outstanding application for dry ice blasting. Watch the movie clips on our internet website to see how dry ice blasting cleans soot, smoke and charcoal from distinct sorts of surfaces.

III. Will we be able to eliminate that awful smoke smell?

- The removing of the smell is accomplished by removing the smell source and/or sealing the smell supply to encapsulate it. Dry ice blasting removes the soot, charcoal and smoke film, which is the smell supply, from accessible regions.

- For the duration of a fire air currents carry smoke and soot into cracks, openings and areas not in close proximity to the fire itself, added cleaning and/or sealing of these places and inaccessible areas might be necessary.

IV. Can we achieve our cleanup with no adding hazards to our atmosphere?

- Dry ice blasting is protected and environmentally friendly. Dry ice is pure CO2 in its solid state, it is in its gaseous state in the air about us. When we inhale our bodies use the oxygen and we exhale CO2. Green plants take CO2 from the air and give off oxygen.

- Dry ice blasting is non-toxic, non-conductive and there is no employee exposure to hazardous cleaning chemical compounds or options. Dry ice blasting meets the recommendations of the USDA, EPA, and the FDA.