CAD

From Teamnumber1

Parts altered by the team.

Contents 1 Lead Screw 1.1 Flexure 1.2 Teflon Nut 2 Carriage 2.1 Carriage Base 2.2 Carriage End Caps

Lead Screw

Flexure

• Part
• Drawing
• Martin 11th May
• Part ready to be waterjetted.

Teflon Nut

• Part
• Drawing
• Martin 11th May
• Part ready to be waterjetted.

Carriage

Carriage Base

• Part
• Drawing
• Martin 11th May
• Part ready to be drilled and tapped.

Carriage End Caps

• Part
• Drawing
• Martin 14th May
• Part ready to be drilled and delrin bushing press fit.
• The drawings show a countersink on the caps, but I don't think this exists in real life - if it does, you need to be careful about which side you press fit the bushing into as only one side needs a bushing (this will be the side with the tool on it)