From Sfvlug

Revision as of 17:57, 17 December 2006 (view source) Charlesnw (Talk | contribs) (→/etc/bluetooth/rfcomm.conf: (You will need to change the device setting and possibly channel)) ← Previous diff		Revision as of 17:57, 17 December 2006 (view source) Charlesnw (Talk | contribs) (→/etc/bluetooth/rfcomm.conf: (You will need to change the device setting and possibly channel)) Next diff →
Line 18:		Line 18:
	<nowiki>		<nowiki>
	#		#
		+
	# RFCOMM configuration file.		# RFCOMM configuration file.
		+
	#		#
	rfcomm0 {		rfcomm0 {
		+
	bind yes;		bind yes;
		+
	device 00:0F:86:F6:35:0C;		device 00:0F:86:F6:35:0C;
		+
	channel 1;		channel 1;
		+
	comment "EDGE Internet connection";		comment "EDGE Internet connection";
	}		}

---

Revision as of 17:57, 17 December 2006

Contents 1 Using bluetooth under linux (12/16/2006) 1.1 Slides 1.2 Scripts/Config files 1.2.1 /etc/bluetooth/rfcomm.conf: (You will need to change the device setting and possibly channel) 1.2.2 /etc/bluetooth/hcid.conf 1.2.3 # File: /etc/ppp/peers/edge 1.2.4 /etc/chatscripts/edge

Using bluetooth under linux (12/16/2006)

Slides

• http://www.thewybles.com/~charles/sfvlug/presentations/bluetooth-12-16-2006/bluetooth-user.odp (Slides in OpenOffice format)
• http://www.thewybles.com/~charles/sfvlug/presentations/bluetooth-12-16-2006/bluetooth-user.pdf (Slides in PDF format)
• http://www.thewybles.com/~charles/sfvlug/presentations/bluetooth-12-16-2006/bluetooth-user.swf (Slides in Flash format)
• http://www.thewybles.com/~charles/sfvlug/presentations/bluetooth-12-16-2006/bluetooth-user.ppt (Slides in PowerPoint format)

Scripts/Config files

This will get you a connection to the phone. Still working on ppp issues

/etc/bluetooth/rfcomm.conf: (You will need to change the device setting and possibly channel)

# # RFCOMM configuration file. # rfcomm0 { bind yes; device 00:0F:86:F6:35:0C; channel 1; comment "EDGE Internet connection"; }

/etc/bluetooth/hcid.conf

2. HCI daemon configuration file.

1. HCId options

options {

1. Automatically initialize new devices

autoinit yes;

1. Security Manager mode
2. none - Security manager disabled
3. auto - Use local PIN for incoming connections
4. user - Always ask user for a PIN

security auto;

1. Pairing mode
2. none - Pairing disabled
3. multi - Allow pairing with already paired devices
4. once - Pair once and deny successive attempts

pairing multi;

1. Custom pin handler

pin_helper /usr/local/bin/bluez_pin_simple;

}

1. Default settings for HCI devices

device {

1. Local device name
2.  %d - device id
3.  %h - host name

name "ch@r7s";

1. Local device class

class 0x100;

1. Default packet type
2. pkt_type DH1,DM1,HV1;

1. Inquiry and Page scan

iscan enable; pscan enable;

1. discovto 0;

1. Default link mode
2. none - no specific policy
3. accept - always accept incoming connections
4. master - become master on incoming connections,
5. deny role switch on outgoing connections

lm accept,master;

1. Default link policy
2. none - no specific policy
3. rswitch - allow role switch
4. hold - allow hold mode
5. sniff - allow sniff mode
6. park - allow park mode

lp hold,sniff,park;

# File: /etc/ppp/peers/edge

connect "/usr/sbin/chat -v -f /etc/chatscripts/edge" /dev/rfcomm0 # Motorola Phone Cable 115200 # speed nodetach # don't fork debug # show debugging info defaultroute # set the default route replacedefaultroute # yes, override the default route usepeerdns # get the dns servers from the tunnel crtscts # do flow control noauth # no authentication required deflate 0 # don't compress asyncmap 0 mtu 1500 mru 1500 noipdefault idle 600 }

/etc/chatscripts/edge

ABORT ERROR AT&F OK AT+CGDCONT=1,"IP","internet2.voicestream.com" OK ATDT*99# CONNECT