Washing Protocol for Live Glassware

From Protists

(Difference between revisions)
(Created page with 'Notes: *Only wash dishes using LIVE sinks and cleaning supplies such as brushes!!! *Change soapy rinse in tupperware container #1 after each use, but only change DI rinses …')
(Notes)
 
(One intermediate revision not shown)
Line 1: Line 1:
-
Notes:  
+
== Notes ==
-
*Only wash dishes using [[LIVE]] sinks and cleaning supplies such as brushes!!!
+
-
*Change soapy rinse in tupperware container #1 after each use, but only change DI rinses in tupperware containers #2 and #3 if they have been used 3 or more times or if they begin to look dirty
+
   
 +
*Only wash dishes using [[LIVE]] sinks and cleaning supplies such as brushes and soap!!!
 +
*Change soapy rinse in tupperware container #1 after each use, but only change RO rinses in tupperware containers #2 and #3 if they have been used 3 or more times or if they begin to look dirty
-
1.  Rinse out glassware with tap water until most large particulates are removed
+
== Protocol ==
-
2.  Put tap water in glassware tupperware container #1 or directly into large pieces of glassware
+
 
-
3.  Put 1-2 scoopfuls of the special soap near the sink directly into large glassware or into the tupperware container #1 (more soap is located underneath the sink in the culture room)
+
 
-
4.  Allow the glassware to soak for 15-30min if there is not much residue left from cultures or media, or 1hr-overnight for glassware with lots of residue
+
#Rinse out glassware with tap water until most large particulates are removed
-
5.  Scrub the glassware thoroughly until all residue is removed and be sure to remove any labels
+
#Put tap water in glassware tupperware container #1 or directly into large pieces of glassware
-
6.  Rinse the glassware 3x's with tap water to remove any remaining soap
+
#Put 1-2 scoopfuls of the special soap near the sink directly into large glassware or into the tupperware container #1 (more soap is located underneath the sink in the culture room)
-
7.  Put DI water in glassware tupperware container #2 or directly into large pieces of glassware for 15-30min
+
#Allow the glassware to soak for 15-30min if there is not much residue left from cultures or media, or 1hr-overnight for glassware with lots of residue
-
8.  Remove DI water from glassware (down drain or back in tupperware container #2)
+
#Scrub the glassware thoroughly until all residue is removed and be sure to remove any labels
-
9.  Rinse off glassware with fresh DI water if necessary
+
#Rinse the glassware 3x's with tap water to remove any remaining soap
-
10. Put DI water in glassware tupperware container #3 or directly into large pieces of glassware for 15-30min
+
#Put [http://editthis.info/protists/DI_water#Types_of_Water RO] water in glassware tupperware container #2 or directly into large pieces of glassware for 15-30min
-
11. Invert glassware on diaper paper and allow to dry
+
#Remove RO water from glassware (down drain or back in tupperware container #2)
-
12. Autoclave on dry cycle if the glassware is dried completely or on wet cycle if there is still moisture in glassware
+
#Rinse off glassware with fresh RO water if necessary
-
13. Store clean/autoclaved glassware in cabinet in the culture room if they are not required immediately (leave autoclave indicator tape on them until they are used)
+
#Put RO water in glassware tupperware container #3 or directly into large pieces of glassware for 15-30min
 +
#Invert glassware on diaper paper and allow to dry
 +
#[[Autoclave]] on gravity/dry cycle if the glassware is dried completely or on liquid cycle (30min sterilization) if there is still moisture in glassware
 +
#Store clean/autoclaved glassware in cabinet in the culture room if they are not required immediately (leave autoclave indicator tape on them until they are used)

Current revision as of 16:04, 18 April 2010

Notes

  • Only wash dishes using LIVE sinks and cleaning supplies such as brushes and soap!!!
  • Change soapy rinse in tupperware container #1 after each use, but only change RO rinses in tupperware containers #2 and #3 if they have been used 3 or more times or if they begin to look dirty

Protocol

  1. Rinse out glassware with tap water until most large particulates are removed
  2. Put tap water in glassware tupperware container #1 or directly into large pieces of glassware
  3. Put 1-2 scoopfuls of the special soap near the sink directly into large glassware or into the tupperware container #1 (more soap is located underneath the sink in the culture room)
  4. Allow the glassware to soak for 15-30min if there is not much residue left from cultures or media, or 1hr-overnight for glassware with lots of residue
  5. Scrub the glassware thoroughly until all residue is removed and be sure to remove any labels
  6. Rinse the glassware 3x's with tap water to remove any remaining soap
  7. Put RO water in glassware tupperware container #2 or directly into large pieces of glassware for 15-30min
  8. Remove RO water from glassware (down drain or back in tupperware container #2)
  9. Rinse off glassware with fresh RO water if necessary
  10. Put RO water in glassware tupperware container #3 or directly into large pieces of glassware for 15-30min
  11. Invert glassware on diaper paper and allow to dry
  12. Autoclave on gravity/dry cycle if the glassware is dried completely or on liquid cycle (30min sterilization) if there is still moisture in glassware
  13. Store clean/autoclaved glassware in cabinet in the culture room if they are not required immediately (leave autoclave indicator tape on them until they are used)
Personal tools