Nighthawk:System Requirements

From Nighthawk

(Difference between revisions)
m (Sysreq moved to Nighthawk:System Requirements)
Line 2: Line 2:
Here is a list of basic System requirements,  
Here is a list of basic System requirements,  
-
the absolute minimum you need to run NightHawk:
+
the absolute minimum you need to run NightHawk Faraday on the console:
-
*64 Mb RAM
+
*32 MB System RAM
-
*2 Gigabyte Hard Drive
+
*3.5 GB on a free Hard Drive partition
-
*Cd-Rom Drive
+
*a DVD-ROM drive, to install
-
*Monitor
+
*a monitor that can do a standard 80*25 text mode
-
*Keyboard/Mouse
+
*an i486 or better processor
----
----
-
Here is a list of Recommended System Requirements:
+
These are the minumum requirements for using NightHawk Faraday with X.Org and Faraday Consolas
-
 
+
*128 MB System RAM
-
*128 Mb RAM
+
*> 5 GB on a free hard drive partition
-
*4 Gigabyte Hard Drive
+
*a DVD-ROM drive
-
*Cd-Rom-or-Dvd-Drive
+
*a graphics card that can handle a framebuffer and has > 2MB VRAM [usually anything made after 1999]
-
*Monitor
+
*a monitor capable of at least 800*600 resolution
-
*Keyboard/Mouse
+
*a Pentium II or faster processor
-
[[Category:NightHawk]]
+
*a [[Nighthawk:Hardware Compatibility List|supported network card]]

Revision as of 17:00, 8 April 2008

System Requirements

Here is a list of basic System requirements, the absolute minimum you need to run NightHawk Faraday on the console:

  • 32 MB System RAM
  • 3.5 GB on a free Hard Drive partition
  • a DVD-ROM drive, to install
  • a monitor that can do a standard 80*25 text mode
  • an i486 or better processor

These are the minumum requirements for using NightHawk Faraday with X.Org and Faraday Consolas

  • 128 MB System RAM
  • > 5 GB on a free hard drive partition
  • a DVD-ROM drive
  • a graphics card that can handle a framebuffer and has > 2MB VRAM [usually anything made after 1999]
  • a monitor capable of at least 800*600 resolution
  • a Pentium II or faster processor
  • a supported network card
Personal tools