From Mycomputer Notes

MEDIUM		Maximum Theoretical Bandwith	Maximum Physical Distance
50-ohm coaxial cable	10 BASE2(Ethernet,Thinnet)	10 Mbps	185 m
50-ohm coaxial cable	10 BASE5 (Ethernet,Thicknet)	10 Mbps	500 m
Category 5 UTP	10 BASE-T(Ethernet)	10 Mbps	100 m
Category 5 UTP	100 BASE-TX (Ethernet)	100 Mbps	100 m
Category 5 UTP	1000 BASE-TX(Ethernet)	1000 Mbps	100 m
Multimode optical fiber	100 BASE-FX (62.5/125 um)	100 Mbps	2000 m
Multimode optical fiber	1000 BASE-SX(62.5/125 um)	1000 Mbps	220 m
Multimode optical fiber	1000 BASE-SX (50/125 um)	1000 Mbps	550 m
Single Mode optical fiber	1000 BASE-LX(9/125 um)	1000 Mbps	5000 m

Contents 1 10Mbps Ethernet 1.1 10BASE5 1.2 10BASE2 1.3 10BASE-T 2 100Mbps Ethernet 2.1 100 BASE-TX 2.2 1000 BASE-TX 2.3 100 BASE-FX 2.4 1000 BASE-SX 2.5 1000 BASE-SX

10Mbps Ethernet

10BASE5

10BASE5 transmitted 10Mbps over a single thick coaxial cables thus giving the name of Thicknet

• First medium used for Ethernet
• Part of the original 802.3 standard
• Inexpensive and do not required configuration(no needs for hubs to extend the length of systems)
• Technologoy is very sensitive to signal reflections
• Cable-dependent across the whole collision domain and it represents a large single point of failure.
• 10BASE5 uses Manchester-encoded signals.
• Other specifications or limitations are:

• Only one station can transmit at a time (collision will occur)
• 10Base5 can run only in half-duplex mode (subject to CSMA/CD rules)
• 100 stations & including repeaters can exist on any individual 10Base5 segment.

10BASE2

Introduced in 1985 and because of its smaller size, lighter wight, and greater flexibility ,it was easier to install than 10BASE5 because of its thinner cable is was known as Thinnet.

• Also know as 802.3a
• Still exist in legacy networks
• Low cost and lack of need for hubs are attractive
• The computer were linked together bu a series of coaxial cables. These cables were attached by BNC connectors to a t-Shape connector on the NIC.
• Because all the computers were attached to a single cable this type of design was a bus designed.

10BASE-T

• Included in the (802.3i) standard in 1990
• Plugged into a central connection, hub or switch, that contained the shared bus.
• Originally half duplex protocol, full duplex feature was added later.
• 10Base-T uses Cat 3, Cat 5, Cat 5e over UTP cable
• Can be runned with T568A or T568B cable pinout arrangement.
• 10Base-Network are alive with a Link Pulse.

100Mbps Ethernet

100Mbps Ethernet

Also knows as Fast Ethernet is a series of technologies including 100Base-TX & 100Mbps-FX.

Commonalities between these two technologies and their difference:

• Timing parameters
• Frame format
• Parts of the transmission process.

Fast Ethernet increase speed of the transmission but it requires extra requirements. The bits being sent get shorter in duration and they are sent more frequently. The tranmission requires more careful timing, trasmission needs frequencines closer to bandwith limitations and it becomes more susceptible to noise.

100 BASE-TX

1000 BASE-TX

100 BASE-FX

1000 BASE-SX

1000 BASE-SX

===1000 BASE-LX===