From Sfvlug

Revision as of 17:58, 17 December 2006 (view source) Charlesnw (Talk | contribs) (→/etc/bluetooth/rfcomm.conf: (You will need to change the device setting and possibly channel)) ← Previous diff		Revision as of 18:00, 17 December 2006 (view source) Charlesnw (Talk | contribs) (→/etc/bluetooth/hcid.conf) Next diff →
Line 33:		Line 33:
	===/etc/bluetooth/hcid.conf===		===/etc/bluetooth/hcid.conf===
-	#
-	# HCI daemon configuration file.
-	#
-	# HCId options
	options {		options {
-	# Automatically initialize new devices
	autoinit yes;		autoinit yes;
-
-	# Security Manager mode
-	# none - Security manager disabled
-	# auto - Use local PIN for incoming connections
-	# user - Always ask user for a PIN
-	#
	security auto;		security auto;
-
-	# Pairing mode
-	# none - Pairing disabled
-	# multi - Allow pairing with already paired devices
-	# once - Pair once and deny successive attempts
	pairing multi;		pairing multi;
-
-	#Custom pin handler
	pin_helper /usr/local/bin/bluez_pin_simple;		pin_helper /usr/local/bin/bluez_pin_simple;
-
	}		}
-	# Default settings for HCI devices
	device {		device {
-	# Local device name	+	name "%h-%d";
-	# %d - device id	+
-	# %h - host name	+
-	name "ch@r7s";	+
-		+
-	# Local device class	+
	class 0x100;		class 0x100;
-
-	# Default packet type
-	#pkt_type DH1,DM1,HV1;
-
-	# Inquiry and Page scan
	iscan enable; pscan enable;		iscan enable; pscan enable;
-	#discovto 0;
-
-	# Default link mode
-	# none - no specific policy
-	# accept - always accept incoming connections
-	# master - become master on incoming connections,
-	# deny role switch on outgoing connections
	lm accept,master;		lm accept,master;
-
-	# Default link policy
-	# none - no specific policy
-	# rswitch - allow role switch
-	# hold - allow hold mode
-	# sniff - allow sniff mode
-	# park - allow park mode
	lp hold,sniff,park;		lp hold,sniff,park;
-		+	}
	===# File: /etc/ppp/peers/edge===		===# File: /etc/ppp/peers/edge===

---

Revision as of 18:00, 17 December 2006

Contents 1 Using bluetooth under linux (12/16/2006) 1.1 Slides 1.2 Scripts/Config files 1.2.1 /etc/bluetooth/rfcomm.conf: (You will need to change the device setting and possibly channel) 1.2.2 /etc/bluetooth/hcid.conf 1.2.3 # File: /etc/ppp/peers/edge 1.2.4 /etc/chatscripts/edge

Using bluetooth under linux (12/16/2006)

Slides

• http://www.thewybles.com/~charles/sfvlug/presentations/bluetooth-12-16-2006/bluetooth-user.odp (Slides in OpenOffice format)
• http://www.thewybles.com/~charles/sfvlug/presentations/bluetooth-12-16-2006/bluetooth-user.pdf (Slides in PDF format)
• http://www.thewybles.com/~charles/sfvlug/presentations/bluetooth-12-16-2006/bluetooth-user.swf (Slides in Flash format)
• http://www.thewybles.com/~charles/sfvlug/presentations/bluetooth-12-16-2006/bluetooth-user.ppt (Slides in PowerPoint format)

Scripts/Config files

This will get you a connection to the phone. Still working on ppp issues

/etc/bluetooth/rfcomm.conf: (You will need to change the device setting and possibly channel)

rfcomm0 {

bind yes;

device 00:0F:86:F6:35:0C;

channel 1;

comment "EDGE Internet connection";

}

/etc/bluetooth/hcid.conf

options { autoinit yes; security auto; pairing multi; pin_helper /usr/local/bin/bluez_pin_simple; }

device { name "%h-%d"; class 0x100; iscan enable; pscan enable; lm accept,master; lp hold,sniff,park; }

# File: /etc/ppp/peers/edge

connect "/usr/sbin/chat -v -f /etc/chatscripts/edge" /dev/rfcomm0 # Motorola Phone Cable 115200 # speed nodetach # don't fork debug # show debugging info defaultroute # set the default route replacedefaultroute # yes, override the default route usepeerdns # get the dns servers from the tunnel crtscts # do flow control noauth # no authentication required deflate 0 # don't compress asyncmap 0 mtu 1500 mru 1500 noipdefault idle 600 }

/etc/chatscripts/edge

ABORT ERROR AT&F OK AT+CGDCONT=1,"IP","internet2.voicestream.com" OK ATDT*99# CONNECT