Wave Power
From Lauraibm
Contents |
MI Summary
Wave power refers to the energy of ocean surface waves. It is distinct from the diurnal flux of tidal power and is determined by wave height, wave speed, wave length and water density. There are several wave farms around the world and the first commercial wave farm was in Portugal and was established in 2006.
Wave Power
Wave power refers to the energy of ocean surface waves and the capture of that energy to do useful work - including electricity generation, desalination, and the pumping of water (into reservoirs). Wave power is a form of renewable energy. Though often co-mingled, wave power is distinct from the diurnal flux of tidal power and the steady gyre of ocean currents. Wave power generation is not a widely employed technology, with the world's first commercial wave farm, the Aguçadora Wave Park in Portugal, being established in 2006.
The north and south temperate zones have the best sites for capturing wave power. The prevailing westerlies in these zones blow strongest in winter.
Physical concepts
When an object bobs up and down on a ripple in a pond, it experiences an elliptical trajectory.In general, large waves are more powerful. Specifically, wave power is determined by wave height, wave speed, wavelength, and water density.
Wave size is determined by wind speed and fetch (the distance over which the wind excites the waves) and by the depth and topography of the seafloor (which can focus or disperse the energy of the waves). A given wind speed has a matching practical limit over which time or distance will not produce larger waves. This limit is called a "fully developed sea."
Wave motion is highest at the surface and diminishes exponentially with depth; however, wave energy is also present as pressure waves in deeper water.
The potential energy of a set of waves is proportional to wave height squared times wave period (the time between wave crests). Longer period waves have relatively longer wavelengths and move faster. The potential energy is equal to the kinetic energy (that can be expended). Wave power is expressed in kilowatts per meter (at a location such as a shoreline).
The formula below shows how wave power can be calculated. Excluding waves created by major storms, the largest waves are about 15 meters high and have a period of about 15 seconds. According to the formula, such waves carry about 1700 kilowatts of potential power across each meter of wavefront. A good wave power location will have an average flux much less than this: perhaps about 50 kW/m.
Modern Technology
Wave power devices are generally categorized by the method used to capture the energy of the waves. They can also be categorized by location and power take-off system. Method types are point absorber or buoy; surfacing following or attenuator; terminator, lining perpendicular to wave propagation; oscillating water column; and overtopping. Locations are shoreline, nearshore and offshore. Types of power take-off include: hydraulic ram, elastomeric hose pump, pump-to-shore, hydroelectric turbine, air turbine, and linear electrical generator. Some of these designs incorporate parabolic reflectors as a means of increasing the wave energy at the point of capture.
These are descriptions of some wave power systems:
- In the United States, the Pacific Northwest Generating Cooperative is funding the building of a commercial wave-power park at Reedsport, Oregon. The project will utilize the PowerBuoy® technology which consists of modular, ocean-going buoys. The rising and falling of the waves moves the buoy-like structure creating mechanical energy which is converted into electricity and transmitted to shore over a submerged transmission line. A 40kW buoy has a diameter of 12 feet and is 52 feet long, with approximately 13 feet of the unit rising above the ocean surface. Using the three-point mooring system, they are designed to be installed one to five miles offshore in water 100 to 200 feet deep.
- An example of a surface following device is the Pelamis Wave Energy Converter. The sections of the device articulate with the movement of the waves, each resisting motion between it and the next section, creating pressurized oil to drive a hydraulic ram which drives a hydraulic motor. *Two commecial projects utilizing Pelamis technology are under construction, one in Portugal the Aguçadora Wave Park near Póvoa de Varzim which will initially use three Pelamis P-750 machines generating 9.9 MW. Funding for a 3 MW wave farm in Scotland was announced on February 20, 2007 and is projected to use four Pelamis machines.
- With the Wave Dragon wave energy converter large "arms" focus waves up a ramp into an offshore reservoir. The water returns to the ocean by the force of gravity via hydroelectric generators.
- The AquaBuOY wave energy device: Energy transfer takes place by converting the vertical component of wave kinetic energy into pressurized seawater by means of two-stroke hose pumps. *Pressurized seawater is directed into a conversion system consisting of a turbine driving an electrical generator. The power is transmitted to shore by means of a secure, undersea transmission line. A commercial wave power production faciity utilizing the AquaBuOY technology is beginning initial construction in Portugal.
- A device called CETO, currently being tested off Fremantle, Western Australia, has a seafloor pressure transducer coupled to a high-pressure hydraulic pump, which pumps water to shore for driving hydraulic generators or running reverse osmosis desalination.
- A device installed near Wollongong, New South Wales, uses a parabolic reflector to concentrate wave energy into an oscillating water column which drives air through a Denniss-Auld turbine, designed to rotate in a constant direction in the oscillating airflow.
Wave farms
Portugal claims the world's first commercial wave farm, the Aguçadora Wave Park near Póvoa de Varzim, established in 2006. The farm will initially use three Pelamis P-750 machines generating 2.25 MW. Initial costs are put at 8,5 million euro. Subject to successful operation, a further 70 million euro is likely to be invested before 2009 on a further 28 machines to generate 72.5 MW.
Funding for a wave farm in Scotland was announced on February 20, 2007 by the Scottish Executive, at a cost of over 4 million pounds, as part of a £13 million funding packages for marine power in Scotland. The farm will be the world's largest with a capacity of 3MW generated by four Pelamis machines.
